Hex, RGB, HSL, HWB, HSV and CMYK for one colour, with relative luminance, perceived brightness, contrast figures and colour vision simulations.
#1a7f4b · readable with white text
Contrast 5.02:1 on white and 4.18:1 on black. Hue 149.1°.
Relative luminance is the WCAG quantity that contrast ratios are built from. Perceived brightness is the older weighted formula that matches what designers mean by “how bright does this look”. They disagree, especially on saturated blues and greens — using one where the other is meant is how a contrast check comes out wrong.
24px on white · 5.02:1 · passes 3:1
24px on black · 4.18:1 · passes 3:1
24px is WCAG's large-text size, where the threshold is 3:1. For body text the threshold is 4.5:1, which the figures above report — the contrast checker renders a pair at three sizes if you want to see all of them.
The CMYK figures are the naive device-independent conversion. Real CMYK depends on an ICC profile, the ink set and the paper — there is no profile-free mapping from sRGB to printable ink, so these are for reading the rough composition rather than for sending to a press.
No working long-wavelength cones. Reds darken sharply and red against green becomes hard to separate. Affects roughly 1% of men.
No working medium-wavelength cones. The most common form; red and green converge without the darkening that protanopia causes. Affects roughly 1% of men.
No working short-wavelength cones. Blue and green converge, and yellow can read as pink. Rare, and affects men and women about equally.
No colour discrimination at all. Shown here as WCAG relative luminance, which is the honest version — if two colours are indistinguishable in this view, nothing but lightness separates them.
A model, not a photograph of what someone sees. It assumes one cone type is entirely absent, which is the dichromat case; the far more common anomalous trichromacy is a partial shift this does not represent, and two people with the same diagnosis do not see identically.
Color Inspector runs entirely on your device — nothing is uploaded.
You’re on the Free plan. Compare plans
One colour, read every way that matters: all six notations, the two different brightness measures, contrast against white and black, and what it looks like to someone who does not see all three cone types.
Two of those numbers are routinely confused and the page keeps them apart. Relative luminance is the WCAG quantity — it is the thing contrast ratios are built from, and it weights the channels after linearising them. Perceived brightness is the older weighted formula that matches what designers mean by "how bright does this look". They disagree, sometimes substantially, and most on saturated blues and greens. Using one where the other was meant is a common way for a contrast check to come out wrong.
The CMYK figures are the naive device-independent conversion and are labelled as such wherever they appear. There is no profile-free mapping from sRGB to printable ink: real CMYK depends on an ICC profile, the ink set and the paper. These numbers are useful for reading a colour's rough composition and for round-tripping within one document, and sending them to a press will produce something else.
The colour vision simulations use the Viénot, Brettel and Mollon LMS model on linearised RGB, which is the step most implementations skip and the reason many simulators are visibly wrong in the midtones. They are still a model of complete dichromacy rather than a photograph of anyone's vision, which the page says beside the swatches.
Relative luminance is the WCAG quantity that contrast ratios are computed from, measured on linearised channels. Perceived brightness is the older weighted-channel formula that matches what designers mean by how bright something looks. They disagree most on saturated blues and greens, and substituting one for the other is how a contrast check goes wrong.
Not reliably. This is the naive device-independent conversion; real CMYK depends on an ICC profile, the ink set and the paper, and no profile-free mapping from sRGB exists. Use these to read a colour's rough composition, and get the press values from whoever is printing.
Hue, whiteness and blackness — a CSS colour notation that is often easier to reason about by hand than HSL, because tinting and shading are separate axes rather than one lightness value that does both.
They are a correct implementation of a model, not a picture of what someone sees. The model assumes one cone type is entirely absent, which is dichromacy; the far more common anomalous trichromacy is a partial shift it does not represent, and two people with the same diagnosis do not see identically.
Yes, and it must. A translucent colour's real contrast depends on what is behind it, so a translucent input is flattened onto the comparison background before the ratio is computed. Against a different background the number changes.